Quote: |
or it will damage the pins on the legs of the processor |
Quote: |
thermal compound (usually silicon paste) |
Quote: |
white clips on the edge of the sockets |
Quote: |
NOTE: If you aren’t sure if the memory is compatible with the board you can use the memtest86 utility |
Quote: |
After this put the backplate into the case over where the I/O connectors will go. |
Quote: |
When connecting the case leads the darker wires are usually positive and the white wires are generally negative! |
Quote: |
Lay the motherboard out on a table with the anti-static bag underneath. Bring the metal arm on the side of the socket on the motherboard up to a 90 degree angle.
|
5pry73 wrote: |
Tell me if im wrong, but you can use the pc shell to discharge static can't you? By holding it or touching it... if its metal...
btw good stuff matt! |
output generated using printer-friendly topic mod, All times are GMT + 2 Hours